1. All 3M Products
  • 3M™ Scotch-Weld™ Structural Plastic Adhesive DP8010
  • 3M™ Scotch-Weld™ Structural Plastic Adhesive DP8010

    Products
    • Creates strong bond on low surface energy plastics (LSE) such as polyolefin with minimal or no surface prep required
    • Resists many chemicals, water, humidity and corrosion
    • Formulated to bond multi-material assemblies such as LSE plastics, thermoplastics, composites and metals
    • Medium viscosity allows controlled dispensing
     More...
    Volume (Imperial)
    Volume_Imperial
    Products Available
    Available options:
     Volume (Imperial)
    Details

    3M™ Scotch-Weld™ Structural Plastic Adhesive DP8010 Blue is a two-part acrylic adhesive specially formulated to bond many low surface energy plastics, including many grades of polypropylene, polyethylene, and thermoplastic elastomers (TPEs) without special surface preparation.

    When using a Duo-Pak (DP) size adhesive, rely on 3M dispensing equipment for convenient and accurate metering, mixing and dispensing.
    Creates a Strong Bond on Low Surface Energy Plastics
    Structural bonds can be achieved without special surface treatments such as chemical etching, plasma, flame, or corona treatment or priming. Simply wipe the surfaces with isopropanol to remove mold release agents, dust dirt, etc. 3M™ Scotch-Weld™ Structural Plastic Adhesive DP8010 Blue also bonds metals, ceramics, and wood and most other plastics. It is slightly flexible when cured. We also formulate this adhesive with 8 mil spacer beads for bond line spacing.
    Recommended Applications

    Joining plastics to metals, such as in the manufacture or repair of appliances
    Bonding low surface energy plastics without priming
    Impact resistance composite bonding
    Manufacture or repair of various sporting goods equipment
    Low surface energy plastics such as polypropylene, polyethylene and thermoplastic elastomers (TPEs)

    Our 3M™ Scotch-Weld ™ Acrylic Adhesive DP8010 starts with medium viscosity for controlled dispensing and spreads to sufficiently wet out the surface. The mix ratio is 10:1 and provides a 10 minute work life. The adhesive reaches handling strength in approximately 1 hour and is fully cured in 8-24 hours (at 72° F /22° C).
    Easy Adhesion with Acrylic
    Acrylic adhesives are two-part adhesives that provide excellent bond strength and durability. Often referred to as epoxy adhesives or epoxy glue, acrylics actually belong to a separate chemical family with their own unique characteristics. This very unique adhesive bonds LSE plastics without priming or other surface treatments.

    • Creates strong bond on low surface energy plastics (LSE) such as polyolefin with minimal or no surface prep required
    • Resists many chemicals, water, humidity and corrosion
    • Formulated to bond multi-material assemblies such as LSE plastics, thermoplastics, composites and metals
    • Medium viscosity allows controlled dispensing
    • 10 minute work life with 60 minute handling strength
    • Strong adhesive can replace screws, rivets and welding
    Specifications
    Adhesive Type
    Acrylic
    Applications
    Bonding Composite Materials
    Brand
    3M™
    Design Challenges
    Noise Vibration & Harshness Control NVH
    Full Cure
    8-24 Hours @ 72 F (22 C)
    Hardness
    55-60 Shore D
    Indoor/Outdoor
    Both
    Industries
    Construction, Consumer Goods, Electronics, General Industrial, Medical, Metalworking, Military and Government, MRO, Signage, Specialty Vehicle, Transportation, Woodworking
    Maximum Operating Temperature (Celsius)
    66 Degree Celsius
    Open Time
    10 Minute
    Physical Form
    Flowable Liquid
    Position
    Best
    Product Form
    Cartridge
    Product Type
    Structural Plastic Adhesive
    Shear Strength at 72 Degrees F (22 Degrees C)
    2700 Pound-Force Per Square Inch
    Shelf Life in Months (from date of manufacture)
    12
    Storage Temperature
    <=40 Degree Fahrenheit
    Viscosity
    Self-Leveling
    Volume (metric)
    45 mL, 490 mL
    Work Time
    8 Minutes
    Follow Us
    The brands listed above are trademarks of 3M.
    Change Location
    Malaysia - English